FN Herstal Firearms banner

failure to feed

  1. FN SCAR 16S
    Hello, So a little under 2 years ago I purchased a used Scar 16s. In its config right now it's mostly stock except with a Geissele trigger. Now the issue I'm having is that on hitting the bolt release on a loaded factory FN 16s mag or Gen 3 PMAGs, I get failure to feeds where the bullet is...
  2. FN FNS
    Hello all, I'm new to this forum and would appreciate any advice concerning my FNS9 jamming problem. I will try to give as much info as I can and hopefully someone could possibly help me resolve the intermittent failure to feed problem. When I run the gun hard(i.e. fast firing) I have no...
  3. FN PS90
    I was firing my PS90 at the range yesterday and after about 60 rounds the gun stopped firing. I took the magazine out and found that the bullets were not being seated properly in the chamber. When I took the gun home to clean and inspect it, I found that there was a piece of a shell casing which...
  4. FN SCAR 17S
    Hello everyone, I purchased my SCAR 17S on Saturday I put . Today 220 rounds through it. At the very end, in the middle of the last magazine, the rifles bolt caught a round and stuffed it into the front of the mag, shoving the bullet into the case. I removed the round and shot 4 more rounds and...
Top