FN Herstal Firearms banner

failure

  1. FN FNX
    Hello everyone wanted to see if my issue is a common one or if it’s even an issue at all. I purchased an FNX 45 Tactical with 10 round mags in mid October and when I first took it out about a week after I bought it and I first shot it I had it jam 5 times within the first 30 rounds (2 failure...
  2. FN Five-seveN
    I posted a thread many moons ago about my Five Seven having FTS/FTF/FTE issues. It can be viewed here: https://fnforum.net/forums/fn-five-seven/200073-failure-strike-i-want-cry.html I replace the extractor, extractor spring, and cleaned the firing pin channel and every other part of the gun...
  3. Handgun Room
    I will never buy Ed Brown products again! I got a hammer strut from Ed Brown for a 1911 and it failed immediately upon installation. You can see in the photo the part had a huge void from the factory. Only a small piece was holding the part together as you can tell from the finish covering...
  4. FN PS90
    Hi, I’ve had my PS90 for about 5 years and run roughly 2,000 rounds through it without a single issue…until my last two trips to the range. I was firing SS197SR ammo (Product #: 10700017) and had several failures to feed some rounds simply weren’t stripped from the magazine and moved to...
  5. FN FS2000
    I originally posted this under the "Chambering Rounds from the Magazine in the FS2000" thread but never got any responses so I thought I'd post it as its own thread in hopes of getting some thoughts from those with more experience. ---- I have inserted fully loaded magazines on both an open...
Top