FN Herstal Firearms banner

sbr

  1. Reflex suppressor on PS90 - legalities?

    FN PS90
    I do not want to SBR my PS90 because when you move an SBR across US state lines, you need to inform the ATF/etc. OTOH, you don't need to inform the ATF when you take a suppressor across state lines. I want to have minimum length for the rifle without going the SBR route, so I want to get and...
  2. PS90 barrel stuck (SBR conversion)

    FN PS90
    Hello, I recently acquired an OD green PS90 with factory black ring sight and immediately stamped it. Stamp was approved a few days ago, and I'm trying to remove the barrel, but it is absolutely ****ing seized. I've removed the blind pin I've thinned a 15mm wrench The upper is in a vice I am...
  3. Fn ps90 sbr team

    FN PS90 Photo Section
    Over a year from purchase to SBR and Suppressor stamps I have assembled the TEAM FN. Oh GOD they are fun.
  4. Approved EFFEN90

    FN PS90
    Finally got my stamp back for an EFFEN90 receiver I purchased in October. I did not strip a regular rifle to assemble it, but put it together with parts from MGW and had the take off barrel from my other PS90 (which I replaced with a CMMG) cut down and threaded by Tros. I think it turned out...
  5. PS90 Suppressor Options 9mm or 30cal

    FN PS90
    I am starting to plan out my PS90 SBR build and trying to decide on a suppressor and mount. I have a Gemtech GM-9 and a YHM Phantom LT 7.62 can, and was wondering what everyone's thoughts are on either running a 9mm or .30cal can? I know people have done both. With the GM-9 I could use a...
  6. 16S SBR Barrel - Factory FN 10” but open to others

    Want to Buy
    WTB 5.56 short SCAR barrel. I’m going SBR on my 16S. I’ll have a barely used factory 16” setup for sale or trade after I find a short barrel, obviously. I’m open to alternatives, but have been leaning toward the factory 10” barrel with the gas block. Thanks! Josh
  7. Thinking about assembling a PS90

    FN PS90
    I am thinking about putting together a PS90 from parts using an Effen90 receiver. I do already have a SBR'd PS90 that I love, and understand how the rifle works. However I have a few questions/concerns. Parts I already have. Green stock, trigger pack, end plate, flash hider, Parts I need to...
  8. Scar 17S, SBR Registered, Suppressor, Case and much more!

    FN Guns and FN items For Sale
    The safe queen package has been shot less than 50 times and comes with an AAC 762-SDN-6 suppressor, Vortex Viper PST 6-24 MRAD with custom FDE Duracoat, Duracoat SCAR scope mount with custom FDE Duracoat, Geissele SuperSCAR Trigger, Surefire Scout desert tan, AAC flash hider, LaRue Tactical MOAB...
  9. P90 PS90 laser mount 2.0

    FN PS90
    A year ago I started working on a better way to mount a laser to my PS90 SBR. I went through several prototypes and have finally come up with one that is nearly perfect. It puts the laser at your fingertips to be easily turned on and off, doesn't interfere with the charging handle, is solid...
  10. PS90 Collection with 2 stocks and assorted ammunition

    FN Guns and FN items For Sale
    A rare opportunity to own one of the most comprehensive FNH P/PS90 collections offered for sale due to moving out of the country. You will receive 2 stocks, one OD green and the other a custom fitted (by me) Laserex factory (from Australia) infrared laser in black. The green stock has the...
  11. SCAR ARTWORK 75th Ranger Regiment and 160th Special Operations Aviation Regiment

    FN SCAR Photo Section
    Today I purchased Stuart Brown's Canvas Gicle'e "Into the breach", from Ty's artwork and framing in Fayetteville, NC just outside Ft. Bragg. This massive print is awesome in every detail. The canvas shows the 75th Ranger Regiment Fire Team and members of the 160th Special Operations Aviation...
  12. WTS: MREX 6.5" rail extension (black)

    FN Guns and FN items For Sale
    I would like to sell my KDG MREX 6.5" rail extension. It is in pristine condition without a single scratch or ding. These rail extensions are great as you can tell from post on the forum. the only reason I am selling is I have A pending form 1 for my Scar and it will not fit after the CQC...
  13. SBR or Pin a suppressor

    FN PS90 Accessories & Mods
    I'm new to the forum and a new satisfied PS90 owner. Picked up a standard new for $950 I want to do something about the barrel. Not a lot of info on the 5.7 out there so I want to hear from you guys... the PS90 is next up after the scorpion for HD and I want to know a few things. 1) which...
  14. Law Tactical Gen3 FSA Finally Availible

    SBR, Suppressors and NFA Items
    Hey guys, just a heads-up. I FINALLY got my Gen 3 Law Tactical Folding stock adapters. I have been waiting forever for these to come in for a 300 AAC BLK integrally suppressed SBR build. I got in touch with Law Tactical and they are no longer selling on their website. They have been out of...
  15. fn p90 flash hider

    FN Guns and FN items For Sale
    This is a new fnh p90 flash hider. Never used. Asking 100$ located in rockwall texas
  16. SilencerCo Easy Gun Trust question

    SBR, Suppressors and NFA Items
    Hello all, I did a search and couldn't find anything in the forums about this but was wondering if any of you have tried SilencerCo's Easy Gun Trust. They advertise it as being only $129.99 and send you an instructional email after payment to fill out the forms. Any reviews as far as...
  17. WTS Flash Hider off my new SCAR 16S SBR upper

    FN Guns and FN items For Sale
    Selling the flash hider that comes on the short barreled 16S barrel assemblies. I am in Detroit, Michigan but I will ship for free via USPS Flat Rate box anywhere in the US. I assume that some FN supplier makes the flash hider. Obviously, 1/2x28tpi so it will fit on the 16 or a standard AR in...
  18. South Carolina SBR Help

    SBR, Suppressors and NFA Items
    Can anyone with first hand knowledge tell me if the citizens of South Carolina can legally purchase a SBR? I've been researching this for a while now. I've been told SBRs are not legal, but my suppressor is. I don't want to spend money on one in the near future if I would have to sell it...
  19. Looking to SBR my PS90 not sure on the process.

    SBR, Suppressors and NFA Items
    I'm finally looking to put forth the wait to SBR my PS90 I know this thread, http://fnforum.net/forums/sbr-suppressors-nfa-items/596-ps90-sbr-paperwork-step-step.html is stickied at the top but its very old and a lot of the links are missing/broken has anything changed in the process to do...
  20. SBR / Barrel Question

    SBR, Suppressors and NFA Items
    Hi guys, First post, and brand new FN PS90 owner (not even a 7 day owner yet). First off I've wanted this gun since I was 12, I'm now 24 and am finally able to say I own this fine machine. Or as my friends say, "this is a weird gun." As I was growing up more and more shows started using it for...
Top