FN Herstal Firearms banner

1 - 3 of 3 Posts

·
Vendor
Joined
·
147 Posts
Discussion Starter #1
Just finished our new mount for the Aimpoint Acro loaned to us by a generous customer of ours! We decided to make two versions of the mount, one as low as can be, to stick to what we're famous for. And another roughly 100 thousandths higher to work with our FX3 3X Optic Flipper. Let us know what you think! No idea why Aimpoint shy'd away from what was a perfect mounting system to this annoying dovetail, but it is what it is.

Acro1.jpg
acro5.jpg

Available now on our site. As always any questions or comments let me know! Sam

Design Machine
[email protected]
https://dmachineri.com/
401-783-0487
 

·
Vendor
Joined
·
147 Posts
Discussion Starter #3 (Edited)
I mistakenly rushed to send the optic back to the customer with the mount because it took me awhile to make the prototype because my only 45 degree dovetail cutter broke! So I forgot to take a picture of it on the PS90, but when he receives it he's going to send me a few pictures to post.

Edit:
20190611_183040.jpg
20190611_183538.jpg
20190611_183623.jpg
20190611_183909.jpg
20190611_182631.jpg
 
1 - 3 of 3 Posts
Top