FN Herstal Firearms banner

1 - 10 of 10 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
So I just got my ps90 and I'm scratching my head thinking what can I use to carry this? Over the years I build up a small 'ish' collection of bags and I keep them stored in plastic bins.

I bought a Ruger 10/22 takedown back when they first came out and while the case it came with was cool, it was also kind of useless for me to take into the backcountry. So I bought a nifty roll up case, put the takedown bag in the bin and that was that.

I had to pull the seams on one of the divided pockets but the case fits a taken down ps90 wonderfully, even with a red dot sight. Extra mags have to go with the upper by the barrel but there is plenty of space for that. Accessories and boxed ammo were placed in the exterior pockets.

Now I just need to cover up that big red Ruger logo.
 

·
Registered
Joined
·
1,639 Posts
The Ruger 10/22 takedown case is long enough to house an SBR PS90, but the width of the case is only 7.5in where the PS90 height is ~8.25in.
The Ruger takedown case depth is also 5.5in so it is possible to put an SBR PS90 fully into it by putting the height of the rifle at a diagnol to the width and depth of the Ruger case.
Assuming the Ruger case has a rigid 5.5in depth and 7.5in width, the diagnol dimension is ~9.3in

http://truthaboutguns-zippykid.netdna-ssl.com/wp-content/uploads/2013/02/P1230231-900x601.jpg

HOWEVER, The PS90 in full barrel length is a problem. Over 26.25in, longer than the Ruger takedown case length.
If you don't mind the full length PS90 barrel sticking out the top of the Ruger case, then you are okay.
You could put some sort of protective "sock" or something else to protect the barrel to function as a protective sleeve.
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
I don't get what you're saying. I said I broke it down and it fits great.

Not getting it sbr anytime soon as I'm saving for a holographic sight over my existing red dot.
 

·
Registered
Joined
·
22,109 Posts
Sounds good!!!

Try to post up some photo's.
 

·
Registered
Joined
·
1,639 Posts
I don't get what you're saying. I said I broke it down and it fits great.

Not getting it sbr anytime soon as I'm saving for a holographic sight over my existing red dot.
I gave the dims for a fully assembled PS90, nothing to not get there. So I'm not understanding why you don't get it.

But yes, reading again your first post, I see now where you said you took down your PS90.
And, I agee, the Ruger case will store a PS90 wonderfully when it is taken down.

And a holographic sight would be a great upgrade to the PS90.
Ive used an Eotech one before on an AR platform, Im sure one would be excellent on the PS90 since it is a bullpup and very nicely tucked in.
 

·
Registered
Joined
·
1,639 Posts
For a patch to go over the Ruger logo, if you're handy with the needle and thread, you could sew an FNH one over it.
If the Ruger logo is particularly too big, you could sew a big Velcro square over it and get an FNH Velcro patch to stick on

http://gettactical.net/wp-content/uploads/2013/10/fn22.jpg


Going with the Velcro idea, you can switch out patches for other cool ones:
http://www.molonlabeindustries.com/images/ISISHuntingClubSubWeb.jpg
http://scontent-b.cdninstagram.com/.../e15/10903205_647270452044865_950708299_n.jpg
https://s-media-cache-ak0.pinimg.com/236x/39/28/84/392884f90fc3ed321eaed8d4355f979d.jpg
https://s-media-cache-ak0.pinimg.com/474x/32/55/c6/3255c6dfee40d326623f9e2ee07110ec.jpg
http://thumbs4.picclick.com/d/l400/...AF-TALIZOMBIE-WHACKER-OPERATOR-VELCRO-FUN.jpg
 

·
Registered
Joined
·
22,109 Posts
Nice!!!
 
1 - 10 of 10 Posts
Top