FN Herstal Firearms banner
1 - 2 of 2 Posts

· Registered
Joined
·
2 Posts
so I've tried a few times to replicate your issue, And all I can come up with is if after dropping the take down Lever/pin ( call it what you must) and sliding the slide off the frame . if at this point you drop the hammer at any point while cleaning the gun and not replacing the hammer to the cocked position and re mounting the slide you can end up with the exact issue you're describing. not saying it cant happen any other way but that's all I could come up with. That or you broke something while at the range or when cleaning it.
so what fixed the problem? I’m have the same issue as the original poster
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top