FN Herstal Firearms banner

M92 PAP and surefire socom 762RC suppressor

2824 Views 2 Replies 3 Participants Last post by  Jeremy M.
So I have a few questions about shooting a M92 PAP AK47 pistol with a surefire socom 762rc suppressor...

How can i check to make sure i will not have a baffle strike? I know ak47s have issues with threads being concentric to the bore.
I have a usmachinegun thread adapter installed with a surefire flash hider suppressor mount on that.
http://www.usmachinegun.com/proddetail.php?prod=M922-308 (thread adapter)

Could i just run this 7.62x51mm barrel straightness gauge down the bore with the suppressor mounted and check for resistance?

Could i just send the whole gun with the usmachingun adapter and flashider mount installed to ADCO to be checked?

Does the timing really matter on a surefire flash hider mount?
I know brakes need to be timed.

Would shooting wolf or tula steel cased 7.62x39 through the can be an issue?

What happens if i have a baffle strike?
I doubt surefire would cover it all at no cost.

At the end of the day this may not even be worth it. I already have everything installed. I'm just afraid to pull the trigger and have a baffle strike.

Thanks for any input. I will obviously look into this more myself when i have time.
1 - 1 of 3 Posts
The problem with the m92 is that the threads aren't even on the barrel. The threads are part of the gas block so they probably aren't concentric. If you still want to give it a shot I would definitely get it checked out by someone before you risk putting a new hole in your can.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.