Can you get additional shots from top and bottom? Thumbs up so far.

 

I didn't thinkthey were out yet

 

Interesting. Where'd you get it?

 

Right. Where and how much?

 

Got it from vltor website and 325.00 for both the normal length and the extension piece.

 

I can't find it. Help with a link?
Found it http://www.vltorstore.com/casv-scar-scar-handguard/

 

Yeah I'll take more pictures tomorrow once I get up

 

It's got two quick disconnect spots for a sling and where the front iron site is at there is enough room for it to fold down but I took my iron sights off so it's just an empty spot in the rail... For now I have a friend milling something up for me though

 

you can buy 2in rail sections if you need any railing at all and you can put it pretty well anywhere there is holes, so you can customize it to your needs. like i said mine looks goofy on top because there isn't a front sight post but hopefully ill have a nice piece for that in a week or so.

 

I am a little confused at what I am seeing. This is the Handguard AND an extension combined? Or this is just the handguard?

 

(520) 408-1944

I just called their number and asked when they was coming out with it and they told me it was available for pre order gave them my info and it was maybe a week later I had it in the mail.

CASV Free Float Handguards - Vltor Weapons Systems - CASV-M (Mid Length)

this is the one its the mid length and then order the extension that goes with it.

 

ok so a few more secs of searching and I found it.

CASV-SCAR: SCAR Handguard - Vltor Weapon Systems Store

 

Interesting. How much weight does it add? Can you still pull the barrel with it installed?

H

 

What was installation like?

Looks very interesting...

 

Looks great, much like the CASV EL on my AR15. Thanks for posting additional pictures. The quality is very nice. Let us know how it performs when you take it out to the range.

 

Nice.. Just spent 230 on the rail extension.. No way I'm going to pay 250 more to cover it.. Way to blow dough though

 

Installation was great remove factory screws and rails replace with vltor screws and handguard, only took about 20 min as for pulling the barrel with it on I'm pretty sure it will still be a breeze. As for weight it adds a little bit of weight towards the front if the barrel. I'm going to the range in about an hr so I'll give you an update on how it works out.

 

Does anybody have the vltor scar stock (not the adapter). I really would like to see some pics. By the way your Scar is looking good.

 

the stock should be in the mail by mon so i will post pictures of that as well. If you go to google type in scar vltor stock and there is all kinds of pictures.

 

I have looked over google images and only see pics from SHOT and their site. But thanks anyway

 

ok didn't get much time at the range but i must say I love it! I can get a farther reach up the barrel its smooth on the hands. I think that the weight farther out forward on the barrel helps even more with the muzzle climb not that there is much anyway. So i highly recommend everyone try it out and see what you think.

 

its bent steel correct? Does it heat faster?

 

Am I missing something? Why would you want one?

 

Yes and IMO it didn't get hot it's about 50degrees here so it got warm but it was nice as my hands was cold. There are plenty of holes and slots so the heat disperses nicely.

 

Why would I want one? I have no use for all the railing I like how it sets it apart from others and isnt the same ol same. I mean if you want to put a bunch of stuff on the rails and be tacticool its all good or if you just like the look of it the factory way have at it. I like how it hides the gas block and more of the barrel, gives a little protection I guess. Why wouldn't you want one is the question?

 

Why wouldn't you want one is the question?

Enjoy. I just think that one of the benefits of having a Scar rifle is that is has all the stuff ALREADY you need on it and without the weight. The extra weight does nothing in terms of improving the gun's maneuverability. I can always use plastic covers over the rails if I didn't want them showing. Not to mention how it may effect the harmonics of the weapon.

 

Nice and certainly different. :shock:

 

Hi Aiden, thanks for the pics and comments on the Vltor hand guard.

I am putting it on my X-mas list to have (at least the SCAR guard). We'll see about the extension.

 

That's the only pictures really is from shot show. I'm not sure but on YouTube I think the is a small video of the scar with the guard I think.......