[Jarod Legsdin]

You guys asked so here they are.
Limited production run on first batch.




Much like the standard PMM B.C.D. the RADDLOCK Compliant B.C.D. Allows the shooter full control of the SCAR 16 or 17 Battery with minor movement of the trigger finger saving the shooter precious time during magazine changes and battery manipulation.

Additionally the PMM RADDLOCK Compliant B.C.D's main paddle is larger with finer serrations for extra grip while engaging the Battery of the SCAR rifle traditionally.

CNC'd in-house out of 6061 aluminum then hardcoated per military standards. The PMM B.C.D. is a low cost and effective way of improving the operating functions of your SCAR rifle.


Product Features:

• Finished in a 8625 type 3 class 2 industry standard hardcoat. In FDE or black
• Mounting hardware and locktite included
• Limited Lifetime Warranty.
• Installation is simple and is done in minutes.
• No permanent modifications to the rifle.
• Light weight less than 1 oz with Hardware.
• Does not contact any critical components of the SCAR during articulation.
• PMM PLA printed Left Hand Mag release spacer included.
• $70.00

parkermountainmachine.com

 

[crazychinaman]

What's the cost and where?

 

[GLOCKCRAZZ]

Anyone use one of this yet. Very interested in getting one.

 

[Jarod Legsdin]

Anyone use one of this yet. Very interested in getting one.

I have almost sold out of the first 50 Gen 1 Raddlock units so they are out there. What are you interested in knowing about them?
~Jrod.

 

[GLOCKCRAZZ]

Just how well do they work. Any issues or problems.

 

[GLOCKCRAZZ]

Is there a gen 2 coming? What's the difference?

 

[btell]

Hey guys just wanted to publicly acknowledge and thank Jarod for his work on these. Just received 2 units from him and they work flawlessly! He's not some large conglomerate yet still willing to help us California folks out! Thanks again Jarod.

 

[Jarod Legsdin]

Is there a gen 2 coming? What's the difference?

GLOCKCRAZZ, The Gen version are functionally the same as the gen 1 units, Bu nature I can't leave things alone. I opted to implement some slight changes on the gen 2 units that result in a little lighter main arm and some added chamfers on the lower and vertical arm.

I am finishing them up on Mill 1 this week,(I ran 1000 this time) and the price will be reduced to $55.00 for all variants of the B.C.D.. Later this week I will add a Pre-order Notice on the site so you guy's can take priority on your orders if need be.

Thanks
~jrod.

 

[GLOCKCRAZZ]

I definitely want to get one. I'll order up gen 2 in black for my 17. Can you post a pic when you get one finished.

 

[pmlsfo]

Hey Jarod, How soon before the new BCD price will reflect on your website?

 

[SeaMac]

By chance did you decide to make the serrations the same size as the OEM bolt release? As you may recall I requested that some time ago! <did you think I would forget!?! lol

GLOCKCRAZZ, The Gen version are functionally the same as the gen 1 units, Bu nature I can't leave things alone. I opted to implement some slight changes on the gen 2 units that result in a little lighter main arm and some added chamfers on the lower and vertical arm.

I am finishing them up on Mill 1 this week,(I ran 1000 this time) and the price will be reduced to $55.00 for all variants of the B.C.D.. Later this week I will add a Pre-order Notice on the site so you guy's can take priority on your orders if need be.

Thanks
~jrod.

 

[Jarod Legsdin]

By chance did you decide to make the serrations the same size as the OEM bolt release? As you may recall I requested that some time ago! <did you think I would forget!?! lol

Sorry, I did not.

 

[SeaMac]

Well shame on you, you may or may not receive an X-mas card or lump of coal from this way this year. :spank:

Sorry, I did not.

 

[Jarod Legsdin]

Well shame on you, you may or may not receive an X-mas card or lump of coal from this way this year. :spank:

Sorry man, You were the ONLY one who was asking about this (after 500 sold) I seem to remember sending you one for free anyways......

 

[SeaMac]

You did indeed and it was very much appreciated, thank you! But.....I would still like the ONE and ONLY "SeaMac Edition" with the "identical" serrations and will happily pay for the Gen 2 BCD which can only be awesomer than the Gen 1. :?

Sorry man, You were the ONLY one who was asking about this (after 500 sold) I seem to remember sending you one for free anyways......