[Jarod Legsdin]

PMM SCAR 16/17 Oversized Magazine Release Button

Parker Mountain Machine is proud to offer our very own Oversized Magazine release button for both the SCAR 16 and 17 Weapons system.


Unlike any other manufacturer on the market PMM has designed the SCAR magazine release button to contour the lower of the SCAR perfectly.

Not only does the PMM SCAR Magazine Release Button give the shooter precious extra surface area on the Vertical face it kicks down Allowing the shooter to transition directly from the trigger to the magazine release button without having to stretch for it.

Finally Unlike any other option on the Market the PMM SCAR Magazine Release button does not protrude above the Factory Magazine release button cage eliminating any extra potential for unwanted magazine ejections if bumped.


CNC'd out of 6061 aluminum then hardcoated per military standards. The PMM SCAR Magazine release button is a low cost and effective way of improving the operating functions of your SCAR rifle.

Product Features:

• Finished in a 8625 type 3 class 2 industry standard hardcoat. In 2 colors FDE or Black
• New 2mm Roll pin included
• Limited Lifetime Warranty.
• Installation is simple and is done in minutes.
• No permanent modifications to the rifle.
• Light weight only .11 oz with Roll Pin.
• Does not contact any critical components of the SCAR lower receiver during articulation
• Optional Roll pin punch Sold separately on the PMM SCAR Hardware Page
• $35.00

 

[Jarod Legsdin]

First 200 of these are sold! thanks so much for the support guys.

 

[fleasly]

2 of them went to my house!!!

 

[Rizza32]

when should we expect another batch?

 

[Jarod Legsdin]

Another Batch? I still have plenty of stock you game?

 

[fleasly]

Hey Jarod,

When are you gonna have the black long dimpled non logo selector levers ready?

 

[Dan5677]

Ordered my magazine release and battery control device yesterday can't wait.

 

[Jarod Legsdin]

Hey Jarod,

When are you gonna have the black long dimpled non logo selector levers ready?

I'm running another 500 of the various Long units now, all the small ones a re done. maybe two weeks or so.

 

[fleasly]

that will work, thank you

 

[duneshoot]

I installed a PMM Mag release today in place of the Stryker Enterprises version. The PMM has tons more surface area. I liked that you can drop a mag by pressing anywhere on the button (obviously), even the closest edge to where your hand would be (if that makes sense).
Great piece of kit!
I have 5 PPM parts on my SCAR-all high quality.
Comparison photo's:

 

[Top0369]

Yeah, high quality. I ordered one FDE and one Black so I have one on the 16 and the 17, easy to install and works well. Photos would be the same as duneshoot, so no need to repeat.

 

[Alpha-17]

I installed a PMM Mag release today in place of the Stryker Enterprises version. The PMM has tons more surface area. I liked that you can drop a mag by pressing anywhere on the button (obviously), even the closest edge to where your hand would be (if that makes sense).
Great piece of kit!
I have 5 PPM parts on my SCAR-all high quality.
Comparison photo's:
View attachment 37776 View attachment 37777

That's a huge improvement. I was "meh" on these when I first saw them, but that looks like it could be handy, especially if wearing gloves.

 

[tj hooker]

Got mine. Install was cake. Looks good, functions well!

 

[Fröman]

I have more than large enough hands to control the SCAR magazine release even with my coyote mechanic's gloves on but the trigger reach on the SCAR has always bee too short for me. This release has me thinking about the possibility of buying a grip with a deeper backstrap distance from the trigger(like a BCM Gunfighter Mod 3) to extend my trigger reach distance to a comfortable location.

I wonder how that would work out, has anyone else tried something like that?

 

[Jarod Legsdin]

I have more than large enough hands to control the SCAR magazine release even with my coyote mechanic's gloves on but the trigger reach on the SCAR has always bee too short for me. This release has me thinking about the possibility of buying a grip with a deeper backstrap distance from the trigger(like a BCM Gunfighter Mod 3) to extend my trigger reach distance to a comfortable location.

I wonder how that would work out, has anyone else tried something like that?

Froman, I may have a BCM Mod 3 Kicking around here that is a 2nd if you want I can send you it to try out?