FN Herstal Firearms banner
1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Did you replace the sear spring? Sounds like there is next to no pressure on it. Simply bending it back a little to add tension will most likely solve the problem. Unfortunately, it will also increase trigger pull.

There are other possible causes. You may have a bad or poorly cut sear, or hammer hooks that are almost non existent. Try the tensioning of the sear spring and see if that solves your problem.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top