FN Herstal Firearms banner

1 - 3 of 3 Posts

·
Registered
Joined
·
22,109 Posts
Discussion Starter · #1 · (Edited)
FNH PS90 Magazine's are translucent brown in color.

Link below shows FNH part numbers, picture is not a true representation of actual color.

FNH USA - Distinct Advantage :: 5.7x28mm Magazine


ProMag PS90 Magazine's are clear.

https://promagindustries.com/fnh/143-ps-90p-90-57x28mm-50rd-clear-polymer-magazine.html


AR57 PS90 Magazine's come in a couple variations. Same brown as FNH, translucent black, and black. They only show what they have in stock in the link below. These mags are made in Korea. No reports of issues, as quality seems to be good.

Magazines


ATI was first to import Korean made PS90 mags, but no longer do. Mags were translucent brown. Few reports of plastic flashing inside the mag, caused rounds to hang up, causing fail to feed.

http://fnforum.net/forums/fn-ps90-accessories-mods/9068-ati-making-ps90-magazines-6.html


Also another Korean company, KCI had mags, cannot find any info about them. They could be the main manufacturer for ATI and AR57.
 

·
Registered
Joined
·
228 Posts
Does anyone have any experience with the ProMag ones? I have seen them online for under $15 each and that alone scared me into steering clear. Anyone?
 

·
Registered
Joined
·
3,649 Posts
I'd trust the Korean ones more than the Pro-Mag ones. However if the pro-mag units have good plastic, normally they're hindered by weak springs, which is easily taken care of with an EA extra power spring. I can't speak for the PS90 mags, but I have 1 30rd promag FSN mag. I cleaned up some of the rough plastic on it, and then threw a extra power spring in it. takes 30 rounds no problem and feeds fine.
 
1 - 3 of 3 Posts
Top