FN Herstal Firearms banner

1 - 12 of 12 Posts

·
Registered
Joined
·
92 Posts
Discussion Starter #1
Just noticed on my SCAR 17 that my gas regulator is not exactly straight. It kind of leans toward the 11 o clock position... I could of swore when I first bought it, that it would align straight in the 12 position. It clicks into the suppressed position and back into its normal position fine. Is this a normal thing for the SCAR's?

Pic:
 

Attachments

·
Premium Member
Joined
·
5,859 Posts
If the detent is dropping into the position notch than I'd say it's fine but you could always remover the regulator plug and make sure a piece of carbon isn't blocking it on the plug or regulator body stopping it from rotating fully.
 
  • Like
Reactions: Ferris2son

·
Registered
Joined
·
340 Posts
does it function correctly? If so, carry on
 
  • Like
Reactions: Talhoffer

·
Registered
Joined
·
92 Posts
Discussion Starter #6
If the detent is dropping into the position notch than I'd say it's fine but you could always remover the regulator plug and make sure a piece of carbon isn't blocking it on the plug or regulator body stopping it from rotating fully.
The detent is dropping into position as it should. No carbon blocking.
 
1 - 12 of 12 Posts
Top