[goretro77]

at the 2 minute mark...

Just take my money already!!!

 

[Troublesx10]

Cool, wish I had waited. Wonder if it will come seperate and can be made to replace other trigger if you have old one.

 

[vertigosol]

Its just the trigger bow. Looks like you just buy the trigger face by itself pretty cool

 

[LESTER]

wish I had waited.

The Super Sabra pack is the same it has not changed

 

[LESTER]

 

[goretro77]

So the Geissele Lightning Trigger Bow will work with the Super Sabra Trigger pack to totally clean up the Tavor's trigger.

The Lightning Trigger Bow is supposed to clean up the linkage slop inherent in a bullpup firearm.

Take my money already damnit!!!

 

[Hairlesswookiee]

SOLD!!! I'm totally getting one of those Trigger Bows to go with my trigger.

 

[blueorison]

Makes me want to get a Tavor even more... but I'm waiting for the smaller form factor.

 

[713HoustonTX]

Nice! Another must have for the Tavor. Thanks for sharing!

 

[goretro77]

saw this on another site about how difficult to install and I assume this is one of the Geissele employees commenting:
"It is overall not too bad. However it will require the IWI wrench for takedown, because you have to remove the barrel assembly to get to the trigger. Once you get to the trigger, it is about 10 minutes to swap the units, and adjust it to your liking. I have installed about 15 of them now, and the first one i did took me about 20 minutes, each one after was about 10."


more from a Geissele source:
"We have confirmed with IWI that the slack is only to aid in passing a drop test. Although, the trigger bow does remove this mechanism, the rifle still passes the military drop test with no issue, we destroyed a perfectly good Tavor or two in the process.

As for proprietary, there is nothing about this that will make it only work with the Sabra Trigger Pack. I have personally used it with our pack, the oem pack, and the oem pack with the return spring removed. All worked with no issues. As for compatibility with any of the other packs, we do not have one to test. I am sure once these are out in peoples hands folks will report back.

We will likely open these up for pre-order like we did for the Sabra Pack so that is is a little more civilized since the demand for the Sabra Pack was so high. I would check back with us about a week after SHOT (so we all have time to get back in the office, pretty much more than half of our company will be in Vegas), and we will get a pre-order list going. I will come back and make a post here to confirm."

I must have it.

 

[LESTER]

GEISSELE Lightning TAVOR Bow Trigger MSRP $99

 

[teamsuzukigsxr]

Definitely will be getting one of these. The trigger pack was a huge upgrade.

 

[hillbillyjim]

Sell ur trigger used and buy a new one

 

[roaddog359]

I was wanting one but now I wonder how hard it will be to do. Not sure about removing the barrel assembly and how hard that is. How much and where do you get the removal tool?

 

[LESTER]

How much and where do you get the removal tool?

Tavor® SAR Barrel Wrench Tool

​

List Price: $14.99
Your Price: $14.99
In stock
Add to cart


​

 

[SONYtec]

Nice post.

 

[BOOMSLANG]

I don't know if it's just the angle or if the new trigger appears to significantly reduce the clearance to get on the trigger, particularly with a gloved hand. Anybody have input on this ?

 

[Hairlesswookiee]

GEISSELE Lightning TAVOR Bow Trigger MSRP $99

 

[713HoustonTX]

saw this on another site about how difficult to install and I assume this is one of the Geissele employees commenting:
"It is overall not too bad. However it will require the IWI wrench for takedown, because you have to remove the barrel assembly to get to the trigger. Once you get to the trigger, it is about 10 minutes to swap the units, and adjust it to your liking. I have installed about 15 of them now, and the first one i did took me about 20 minutes, each one after was about 10."


more from a Geissele source:
"We have confirmed with IWI that the slack is only to aid in passing a drop test. Although, the trigger bow does remove this mechanism, the rifle still passes the military drop test with no issue, we destroyed a perfectly good Tavor or two in the process.

As for proprietary, there is nothing about this that will make it only work with the Sabra Trigger Pack. I have personally used it with our pack, the oem pack, and the oem pack with the return spring removed. All worked with no issues. As for compatibility with any of the other packs, we do not have one to test. I am sure once these are out in peoples hands folks will report back.

We will likely open these up for pre-order like we did for the Sabra Pack so that is is a little more civilized since the demand for the Sabra Pack was so high. I would check back with us about a week after SHOT (so we all have time to get back in the office, pretty much more than half of our company will be in Vegas), and we will get a pre-order list going. I will come back and make a post here to confirm."

I must have it.

So where can one get on this preorder?

 

[LESTER]

Super Sabra Lightning Bow Trigger (IWI Tavor)$99.00
Available for pre-order. For order information, please Call 610-272-2060