FN Herstal Firearms banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,320 Posts
Discussion Starter #1


I'm think where the red dot is on the ejection port might be a good location for use with the Vest Guy vest/sling



Thoughts???
 

·
Registered
Joined
·
4,907 Posts
Plus you might have to notch the dust cover, But if you don't use it any way oh well. But as said by Troubles it my hinder shell ejection.
 

·
Registered
Joined
·
22,109 Posts
I don't recommend it.


Just get an Urban ERT Sling.
 
  • Like
Reactions: Troublesx10

·
Registered
Joined
·
320 Posts
I didn't want to notch my dust cover, which is why I didn't use that location. When you break the gun down and look at the inside of the stock shell, you'll find there aren't many easy locations to install. The rifle was very efficiently designed and the nut on the inside of the noveske QD mount gets in the way in most locations.

-Jason
 

·
Registered
Joined
·
252 Posts
I wouldn't recommend drilling holes in your stock ... just because its made of polymer that doesn mean we go all out on drilling holes left and right for this and that.

Save your green stock! Its rare
 
  • Like
Reactions: ThreeDprof
1 - 6 of 6 Posts
Top